Common areas
easy to maintain.
Lobbies, stairwells, landings, car parks, cellars, shared laundry rooms: maintaining a building's common areas is a recurring cost item. A central vacuum simplifies this cleaning, and the suctioned air is discharged away from frequented areas. AspiWall supports building managers and co-ownerships, both new builds and replacement of an existing unit.
Maintain the common areas,
without the chore.
For a building manager, cleaning the common areas takes time and equipment. Dragging a vacuum from floor to floor is tiring, noisy, and stirs up dust in spaces that are used constantly.
A central unit serves the whole building via a duct network: one inlet per landing, in the car park, in the shared laundry. The cleaning agent simply connects the hose, without carrying a heavy vacuum. The suctioned air is discharged away from frequented areas, which limits the re-suspension of fine dust in the common areas. A solution designed for professional buildings.
Built for
common areas
- One inlet per landing, car park or laundry: no more vacuum to carry
- Suctioned air discharged away from frequented areas
- Simplified maintenance for the agent and the manager
- Replacement or maintenance of an existing unit possible
- Wet & dry option (water and dust) for car parks and cellars
New or existing,
AspiWall steps in.
New building, renovation of common areas, or an existing central unit to replace: AspiWall studies your co-ownership's layout and proposes the right solution, in agreement with the building manager.
In a new building, the ducts are built into the common areas during the structural works. In an existing building, AspiWall carries out a feasibility study and can replace an ageing unit. See our after-sales and unit replacement.
One inlet per key zone
- → One inlet per landing and in the entrance lobby
- → Inlets in the car park, cellar and shared laundry
- → Utility room for the central unit (cellar, bin room)
- → Wet & dry option for damp areas
Where does
the air go?
A standard vacuum, a robot or a stick vacuum filters part of the dust but blows the air back into the room where it runs. With an AspiWall central vacuum, the dirt is sent to the central unit and the vacuumed air is expelled out of the living areas or out of the occupied zones, which limits the re-suspension of fine dust. That is what makes the difference in buildings open to the public and places sensitive to dust.
A benchmark for
air quality.
AspiWall offers central units in Belgium made by Trovac, among other manufacturers. Trovac's central vacuum system has been distinguished by AFPRAL (the French Association for Allergy Prevention) since July 2014. An important reference for buildings where air quality, dust, dust mites and allergens are sensitive matters.
Yes. A single central unit serves lobbies, stairwells, landings, car parks, cellars and shared laundry rooms via a duct network. The cleaning agent connects the hose to the nearest inlet, without carrying a vacuum from floor to floor.
Yes. AspiWall handles the replacement and maintenance of existing units, all brands. For original manufacturer installations, compatible parts, bags and filters remain available. See our after-sales.
Yes. For these areas, AspiWall can offer a wet & dry system (water and dust), with a tank to empty or automatic drainage, in addition to the dry vacuuming that remains the standard for lobbies and landings.
The decision rests with the owners' assembly, usually on a proposal from the building manager. AspiWall provides the study and quote needed to inform that vote, and then coordinates the work.
Yes. AspiWall supports building managers on their common-area projects. Contact AspiWall for a study tailored to your co-ownership.
Common areas easier to maintain?
Are you a builder, a building manager or a cleaning company? AspiWall supports you in integrating central vacuum systems into your projects and buildings, across Belgium. +32 470 71 22 22 · info@AspiWall.be