— You are building
The best time for a central vacuum is while the work is going on
In a new build as much as in a renovation, the ducting runs through the walls and floor slabs while everything is still open. That is the simplest and most affordable moment — the shell is right there, nothing to break open and nothing to redo. And if your house is already finished, nothing is lost: we run it through suspended ceilings, the garage, the cellar, service ducts or the loft. We fit it either way. The only difference is the route.
— Your build schedule
The right time
is while everything is open.
On the drawings
We position the power unit and the inlets with your architect. No design surcharge.
Shell or renovation
Ducting runs through the walls and slabs while everything is open. The ideal moment: nothing to break open, nothing to redo.
Plastering, screeds
The ducts disappear into the structure. Nothing shows any more.
Finishing
Fitting the power unit and the inlets, airtightness test, commissioning.
AspiWall is with you at every stage: see how an installation by AspiWall works, or how to fit it yourself with our guidance on the drawings.
— Day to day
What changes
once you live there.
- →No more vacuum cleaner to carry up the stairs, or to store in a cupboard. The machine sits in the garage or the cellar, and stays there.
- →No dust blown back into the room. The extracted air travels to the power unit instead of returning into the house.
- →The retractable hose stows away inside the pipework. You pull out the length you need, you clean, you let go — the central unit draws it back into the wall. Nothing to get out, nothing to store.
- →Silence in the room being cleaned, because the motor is not in it.
- →A selling point on resale, in the same way as balanced ventilation or underfloor heating.
— What it costs
The prices, plainly.
All prices exclude VAT. The applicable VAT rate is determined on the quote, according to the nature of the works. Equipment and installation are priced separately: you can fit it yourself, or leave all or part of the work to us.
The equipment — as a pack, ready to fit
| Pack | Price |
|---|---|
| 1 retractable point — complete S200 pack, ready to fit | from €1,598.73 |
| 2 retractable points — complete S300 pack, ready to fit | from €2,358.91 |
| 3 retractable points — complete S400 pack, ready to fit | from €2,938.84 |
| 4 retractable points — complete S500 pack, ready to fit | €3,699.00 |
Each pack includes the power unit, the complete retractable kits (hose, wall housing, PVC ducting, fittings) and the accessories — cheaper than the same equipment bought piece by piece. Every combination is on the packs page.
Installation by AspiWall — optional
| Service | Price |
|---|---|
| Final fitting of the power unit | €275 |
| Fitting of retractable hoses — 1 hose (minimum flat rate) | €995 |
| Fitting of retractable hoses — 2 hoses | €550 / hose |
| Fitting of retractable hoses — 3 hoses and more | €523 / hose |
| Fitting of a traditional inlet — labour, part not included | €121 |
| Airtightness test of the network — up to 3 retractable hoses, then +€20 per hose | €165 |
Budget for a family home: the S400 pack with three retractable points is €2,938.84 excl. VAT — power unit, PVC ducting, fittings, installation kits and cleaning sets included, ready to fit. Set against the total cost of building, it is a modest item — and planning it during the works is the cheapest way to do it. Installation by AspiWall is optional, priced from the table above.
Free collection in Remouchamps, delivery within Belgium €75. Mileage surcharge: €0 anywhere in the area we serve.
Full details are on the pricing page. The ready-to-fit packs bundle power unit and hoses at a discounted price.
— Why AspiWall
The installer matters
as much as the machine.
- →Warranty over 10 years on AspiWall S100 to S500 power units: five years at 100 %, then five years at 50 %.
- →A single point of contact, from the drawings to commissioning. We coordinate with your electrician for the ducting.
- →Retractable hose specialists — Retraflex and R-Flex. It is our trade, not a catalogue line.
- →After-sales service for 19 brands on the market. In ten years' time, we are the ones you will call, and we will still be here.
- →Based in Remouchamps, we work throughout Wallonia and in Brussels.
— Frequently asked questions
Your questions. Our answers.
My house is already finished. Is it still possible?
Yes, absolutely. It is even a good part of what we do. We then run the network through suspended ceilings, the garage, the cellar, service ducts, the loft or a ventilated crawl space. The route is different, the result is the same. We come out and tell you what is possible in your home.
Does it need a dedicated room?
The power unit goes in the garage, the cellar or a utility room. It needs a power supply and an air outlet. That is what we define together on the drawings.
How many inlets for a house?
As a rule, one well-placed retractable hose per floor is enough. A second one on the ground floor is sometimes added, for comfort. The exact number depends on the floor area and the layout: we determine it on the drawings or on site, not over the phone.
Does it work in an older house?
Yes. We fit them regularly. The age of the house is not the issue — what matters is finding a route for the ducting, and there is almost always one.
What if I change my mind mid-build?
As long as the walls are open, it is the simplest and the cheapest. After that we adapt the route — it is still doable, it just takes a little more work. Better to talk about it early, but nothing is ever closed for good.
— Existing home
And if your house
is already finished?
Nothing is lost. A central vacuum can be fitted in a finished house too, and it is a good part of our work. The network then takes other routes: suspended ceilings, garage, cellar, service ducts, loft, a ventilated crawl space, or a neatly boxed-in drop along a wall.
What changes: the route, and a little more fitting time. What does not change: the result, the comfort and the warranty. We come out, look at the layout, and tell you straight what can be done in your home and at what price.
Let's talk, whatever stage your project is at.
Send us your drawings, or simply tell us how your house is built. We will tell you where to put the power unit and the inlets, and what it costs.