— Hair salons & barbershops
Cut hair,
vacuumed effortlessly.
In a hair salon or barbershop, the broom never stops. A central vacuum system picks up cut hair straight off the floor — no noisy vacuum, no back-and-forth in front of clients. The motor sits in a utility room: zero noise during welcome and cutting.
— A salon's daily reality
Sweeping all day long
is over.
Hair on the floor after every cut, product dust, allergens: a hairdresser's or barber's salon needs constant cleaning. A standard vacuum is loud, bulky and blows fine-hair-laden air back into the room.
With a central vacuum, a simple wall inlet (or a floor sweep door) picks up hair in seconds. The vacuumed air is never blown back into your client area or cutting zone: it is discharged where the central unit sits — a utility room, a ventilated crawl space or outside, depending on the installation. The remote motor keeps the salon silent. The hose type — retractable or traditional — is determined on site depending on use: discover our retractable hoses.
Built for
hairdressers
- Cut hair vacuumed in seconds
- Remote motor: no noise during the cut
- Retractable or traditional hose, determined on site depending on use
- Zero stale air blown back into the client area: it goes to the unit, kept away
- A clean image for your clients
— Fitting out your salon?
The right moment
is now.
If you are building, renovating or reorganising your salon, now is the ideal time to integrate a central vacuum: ducts run through partitions and floors before the finishes.
AspiWall studies your plan, sizes the central unit to the surface and places inlets near each cutting station. Discover our approach for professional buildings.
PLAN FROM THE START
An inlet at every station
- A vacuum inlet near each cutting chair
- Utility room for the central unit (storeroom, cellar, back office)
- Ducts built into partitions before painting
- Floor sweep door possible at reception
AspiWall network · design and installation to plan, throughout Belgium
— Standard vacuum vs central vacuum
Where does
the air go?
A standard vacuum, a robot or a stick vacuum filters part of the dust but blows the air back into the room where it runs. With an AspiWall central vacuum, the dirt is sent to the central unit and the vacuumed air is expelled out of the living areas or out of the occupied zones, which limits the re-suspension of fine dust. That is what makes the difference in buildings open to the public and places sensitive to dust.
— Made by Trovac
A benchmark for
air quality.
AspiWall offers central units in Belgium made by Trovac, among other manufacturers. Trovac's central vacuum system has been distinguished by AFPRAL (the French Association for Allergy Prevention) since July 2014. An important reference for buildings where air quality, dust, dust mites and allergens are sensitive matters.
Husky Pro units:
water and dust,
at one-shot prices.
Two professional wet & dry central units on promotion: the Pro200, a high-power twin-motor for large networks, and the Pro500, zero maintenance thanks to its automatic drainage to the sewer. Ideal for an establishment open to the public.
Don't let the prices scare you: this is the absolute high end, not a requirement. Our dust central units — AspiWall S400 and S500, also on promotion — are more affordable and just as effective for day-to-day vacuuming. And in any case, our AspiWall S500 remains the most powerful: 1,354 AirWatts and 6,452 mmH₂O of water lift.
Water vacuuming with a traditional hose, on a network designed from the start for water and dust.
Husky Pro200
Twin motor 1,100 AirWatts · network up to 200 m · 7 retractable hoses max
Husky Pro500
Automatic drainage to the sewer · zero bags, zero canister to empty · network up to 80 m
AspiWall S400
Dust · network up to 120 m · 12 traditional inlets or 3 retractables
AspiWall S500
Dust · 1,354 AirWatts — the most powerful in any case · network up to 200 m
— An asset to highlight
A visible argument
for your clients.
Your establishment can promote this installation as a real plus: AspiWall central vacuum system, made by Trovac — among other manufacturers —, a manufacturer distinguished by AFPRAL. The vacuumed air is expelled out of the occupied areas, which limits the re-suspension of fine dust, dust mites and allergens.
« Establishment equipped with an AspiWall central vacuum system, made by Trovac. The vacuumed air is expelled out of the occupied areas to limit the re-suspension of fine dust, dust mites and allergens. »
— Frequently asked questions
Your questions.
Our answers.
Does a central vacuum pick up wet hair?
Yes, a central vacuum easily picks up dry and slightly damp hair. The standard remains dry vacuuming; for liquids, dedicated equipment is still required. On request, AspiWall also offers wet & dry systems (water and dust), with a tank to empty or automatic drainage.
Is the noise a problem while I'm cutting a client's hair?
No. The central unit's motor is installed in a separate utility room (storeroom, cellar, back office). At the cutting station you only hear a light suction sound, far quieter than a canister vacuum.
How many inlets does a hair salon need?
It depends on the surface and the number of stations. Generally, one inlet per cutting area plus one at reception. AspiWall provides a free study from plans or on site.
Which hose for professional use?
The hose type — retractable or traditional — is determined on site depending on use. AspiWall advises the best-suited solution for your salon during the study.
Can the system be installed in a salon that is already open?
Yes, installation is possible in an existing salon. Contact AspiWall to assess feasibility based on your premises.
A spotless salon at all times?
AspiWall studies your salon and supplies your central vacuum across Belgium. +32 470 71 22 22 · info@AspiWall.be