— Gyms & fitness
Large surfaces,
cleaned in no time.
Large volumes, dust, sweat, heavily-used mats and floors, changing rooms: a gym, fitness club or weights room is cleaned fast and often. A central vacuum covers large surfaces from a few inlets; dust and odours are never blown back onto the floors or into the changing rooms, but discharged where the central unit sits, with no recirculation.
— The fitness challenge
Dust, sweat,
odours.
Between the machines, on the mats, in the changing rooms: dust, sweat and odours build up fast. A standard vacuum struggles with large volumes, clogs and blows laden air back into the room.
A central vacuum sends the vacuumed air to a robust unit, set away: the air is never blown back onto the floors or into the changing rooms, it is discharged where the central unit sits — a utility room, a ventilated crawl space or outside, depending on the installation. No recirculation of dust or odours. You cover large floors from a few inlets, without moving a heavy machine. The hose type — retractable or traditional — is determined on site depending on use. For the changing rooms and showers, on request, AspiWall also offers wet & dry systems (water and dust), with a tank to empty or automatic drainage.
Built for
fitness
- Covers large surfaces from a few inlets
- Vacuumed air never blown back onto the floors: no dust/odour recirculation
- Robust, designed for intensive use
- Robust unit set away: remote motor, silence on the floors
- Fast cleaning between classes
— Fitting out your club?
Integrate it
during the works.
Creating a club, an extension, a renovation: this is the time to integrate a central vacuum, with inlets well distributed across the large floors and a unit sized for the surface.
AspiWall studies your plan, distributes inlets across cardio, weights and changing-room zones, and places the unit in a utility room. A robust solution for professional buildings.
PLAN FROM THE START
Cover all the floors
- Inlets across cardio and weights zones
- Inlets in changing rooms and toilets
- Robust central unit in a utility room
- Sizing based on the floor surface
AspiWall network · design and installation to plan, throughout Belgium
— Standard vacuum vs central vacuum
Where does
the air go?
A standard vacuum, a robot or a stick vacuum filters part of the dust but blows the air back into the room where it runs. With an AspiWall central vacuum, the dirt is sent to the central unit and the vacuumed air is expelled out of the living areas or out of the occupied zones, which limits the re-suspension of fine dust. That is what makes the difference in buildings open to the public and places sensitive to dust.
— Made by Trovac
A benchmark for
air quality.
AspiWall offers central units in Belgium made by Trovac, among other manufacturers. Trovac's central vacuum system has been distinguished by AFPRAL (the French Association for Allergy Prevention) since July 2014. An important reference for buildings where air quality, dust, dust mites and allergens are sensitive matters.
Husky Pro units:
water and dust,
at one-shot prices.
Two professional wet & dry central units on promotion: the Pro200, a high-power twin-motor for large networks, and the Pro500, zero maintenance thanks to its automatic drainage to the sewer. Ideal for an establishment open to the public.
Don't let the prices scare you: this is the absolute high end, not a requirement. Our dust central units — AspiWall S400 and S500, also on promotion — are more affordable and just as effective for day-to-day vacuuming. And in any case, our AspiWall S500 remains the most powerful: 1,354 AirWatts and 6,452 mmH₂O of water lift.
Water vacuuming with a traditional hose, on a network designed from the start for water and dust.
Husky Pro200
Twin motor 1,100 AirWatts · network up to 200 m · 7 retractable hoses max
Husky Pro500
Automatic drainage to the sewer · zero bags, zero canister to empty · network up to 80 m
AspiWall S400
Dust · network up to 120 m · 12 traditional inlets or 3 retractables
AspiWall S500
Dust · 1,354 AirWatts — the most powerful in any case · network up to 200 m
— An asset to highlight
A visible argument
for your clients.
Your establishment can promote this installation as a real plus: AspiWall central vacuum system, made by Trovac — among other manufacturers —, a manufacturer distinguished by AFPRAL. The vacuumed air is expelled out of the occupied areas, which limits the re-suspension of fine dust, dust mites and allergens.
« Establishment equipped with an AspiWall central vacuum system, made by Trovac. The vacuumed air is expelled out of the occupied areas to limit the re-suspension of fine dust, dust mites and allergens. »
— Frequently asked questions
Your questions.
Our answers.
Does the vacuum cover large floors?
Yes. With well-distributed inlets and a long hose, you cover large surfaces from a few points, without moving a heavy machine. AspiWall sizes the unit to the gym's square metres.
Does it handle odours and dust without putting them back in the air?
Yes. The vacuumed air is never blown back onto the floors: it is discharged where the central unit sits — a utility room, a ventilated crawl space or outside, depending on the installation. So fine dust and odours are not recirculated in the training space — a real comfort for your members.
Does the system withstand intensive use?
Yes. The units are robust and designed for sustained operation. AspiWall selects a model sized for a club's usage intensity. Warranty conditions for professional installations are defined on a case-by-case basis.
Which hose for professional use?
The hose type — retractable or traditional — is determined on site depending on use. AspiWall assesses your gym and advises the most suitable hose.
Can you equip a gym that is already open?
Yes. Contact AspiWall for a study based on your gym's layout.
An always-spotless gym?
AspiWall studies your gym and supplies your central vacuum across Belgium. +32 470 71 22 22 · info@AspiWall.be